Currently Empty: AED 0.00
GOLD SEEKER with Pulse Induction System
The quickest, simplest, most modern, and precise method for detecting gold and coins beneath the earth.
Two systems are used by the GOLD SEEKER unit to distinguish between precious and non-precious metals.
The ground induction function was added to this unit, which is capable of generating (Eddy Current) (transmitter and receiver).
It sends a signal to the search coil when the system operates (Double D Coil), which in turn produces a spiral current signal (Eddy Current).
Description
This will produce amplifications of spiral waves to more than 1000 pules per second to help the system cover higher depths as well as analyze the target signal to determine if the metal detected is precious or non-precious.
A unique aspect of this unit is its ability to calibrate with the earth to ensure that no signals arising from soil moisture, mineral rocks or soil containing mineral salts or solid soil are disturbed.
After the ground balance mechanism and sensitivity, the setting is adjusted, you can begin searching by raising the search coil 2 cm above the ground and sweeping it right and left, keeping it parallel to the ground.
The unit can make a continuous beep sound when a precious metal signal is picked up, and the Green Indicator comes on.
If the signal is detected for a non-precious metal, an erratic sound is produced by the system and the red indicator comes on.
To increase the sensing range of the coil to reach greater depths, press the Tune button if the signal from the detected target is small, and confirm the target.
Sweep the search coil from right to left and left to right over each area you scan, to avoid missing small and deep targets.
Hover the coil slowly over the target to make sure the target form is precious or non-precious.
To ensure that the target form is precious or non-precious, stop the coil above the target while maintaining a distance of 2 cm above the ground.
The Gold Seeker equipment has a great capacity for distinguishing precious and non-precious metals in a short amount of time.
The Gold Seeker equipment has a search depth of 3.5 meters underground.
The Gold Seeker device is one of the greatest German devices, having received European CE certification in accordance with international standards, as well as an international ISO 9001 certificate.
Technical Specifications
| Technical Specification Name | Technical Specification Value |
|---|---|
| Audio Output | headphones |
| Length | Device (opened): 1513mm – Device (closed): 820 mm |
| Frequency | Max 500 KHz |
| Data processing speed | 16 MHz |
| Operating Temperature | 0 ° C to 70 ° C |
| Operating Humidity | up to 95 % non-condensing |
| Storage Temperature | – 20C° to 70C° |
| Storage Humidity | up to 98 % Relative Humidity |
| Operating Time (54 W Battery) | 12 Hours |
| Waterproof Rating – Detector | not waterproof (weatherproof only ) |
| Waterproof Rating -Coil | waterproof to a depth of (30 cm) |
| Coil | GER30 Ø: 30 cm – GER15 Ø: 15 cm |
| weight total | 6800 g |
| Device weight | 2000 g |
| Bag weight (empty ) | 3900 g |
| Bag dimensions | 810mm x 325mm x 200mm |
| Battery Type | Li-ion Rechargeable Battery – External Battery |
| Battery Output Voltage | Li-ion 10.8 VDC |
| Battery Capacity | Li-ion 54 Wh |
| Battery Run Time | 12Hours |
| Battery Operating Temperature | 0 ° C to 60 ° C |
| Battery Storage Temperature | – 2C° to 70C° |
| Battery weight | 500 g |
| Charger Operating Temperature | 0 ° C to 50 ° C |
| Charger Storage Temperature | – 30C° to 80C° |
| Charger Input Voltage | 90 → 250 VAC 50→60 Hz |
| Charger Output | 12.6 VDC / 1000 mA |
